Machining Technology For Composite Materials: Principles And Practice

E-Book Overview

Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials. With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed

E-Book Content

Machining technology for composite materials © Woodhead Publishing Limited, 2012 Related titles: Composite joints and connections (ISBN 978-1-84569-990-1) The growing use of composites for structural applications in sectors such as aerospace demands that engineers have a thorough understanding of how composite joints behave under various loads. Gaining this understanding is not straightforward because joints and connections in composites present an entirely different set of problems to engineers when compared to metals. This book will address these differences, looking at the design, modelling and testing of joints and connections, using both bonded and mechanical joining techniques. Composite reinforcements for optimum performance (ISBN 978-1-84569-965-9) This new book is concerned with improving the properties and performance of composites by modelling the reinforcements. This is a novel approach as it allows designers to optimise the performance of composite parts by modelling and therefore manipulating the reinforcements before the composite is manufactured. Reinforcements are an integral part of all composites, but often they are simply used during the moulding process with no thought about how their performance can be optimised in the finished product. The book will allow manufacturers to apply modelling techniques to improve the quality and performance of their products. Non-crimp fabric composites (ISBN 978-1-84569-762-4) Non-crimp fabric (NCF) composites are composites that are reinforced with woven mats of straight (non-crimped) fibres. Straight fibres deform much less under tension. NCF composites are being used in applications in the aerospace, automotive, civil engineering and wind turbine sector where strength is important. Non-crimp fabric composites reviews production, properties and applications of this important class of composites. Details of these and other Woodhead Publishing materials books can be obtained by: • • • visiting our web site at www.woodheadpublishing.com contacting Customer Services (e-mail: [email protected]; fax: +44 (0) 1223 832819; tel.: +44 (0) 1223 499140 ext. 130; address: Woodhead Publishing Limited, 80 High Street, Sawston, Cambridge CB22 3HJ, UK) contacting our US office (e-mail: [email protected]; tel.: (215) 928 9112; address: Woodhead Publishing, 1518 Walnut Street, Suite 1100, Philadelphia, PA 19102-3406, USA) If you would like to receive information on fo
You might also like

детали машин. атлас конструкций
Authors: Решетов Д.Н. (ред)    168    0







технология машиностроения (учебное пособие)
Authors: Муратов В.И. , и др.    151    0


машины и оборудование
Authors: Ткачев А.Г.    269    0


способы обработки материалов
Authors: Корягин С.И.    160    0