Modeling Multiphase Materials Processes: Gas-Liquid Systems describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of fluid, high temperature, coupled heat and mass transfer, chemical reactions in some cases, and poor wettability of the reactor walls. Also discussed are: -Solutions based on experimental and numerical modeling of bubbling jet systems -Recent advances in the modeling of nanoscale multi-phase phenomena -Multiphase flows in micro-scale and nano-scale channels and reactors Modeling Multiphase Materials Processes: Gas-Liquid Systems will prove a valuable reference for researchers and engineers working in mathematical modeling and materials processing.
Modeling Multiphase Materials Processes Manabu Iguchi Olusegun J. Ilegbusi Modeling Multiphase Materials Processes Gas-Liquid Systems ABC Manabu Iguchi Graduate School of Engineering Division of Materials Science & Engineering Hokkaido University Sapporo, Hokkaido 060-8628, Japan
[email protected] Olusegun J. Ilegbusi Department of Mechanical, Materials & Aerospace Engineering University of Central Florida Central Florida Blvd. 4000 Orlando, Fl 32816, USA
[email protected] ISBN 978-1-4419-7478-5 e-ISBN 978-1-4419-7479-2 DOI 10.1007/978-1-4419-7479-2 Springer New York Dordrecht Heidelberg London Library of Congress Control Number: 2010938939 c Springer Science+Business Media, LLC 2011 All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks, and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com) Preface Multiphase flow phenomena abound in many materials processing operations, including gas-stirred ladles, blast furnaces, and the like. This book focuses primarily on systems in which liquid and gaseous phases coexist. In general, such systems are complex and difficult to characterize. The phases can be continuous or dispersed, with mass, momentum, and energy exchange across the interfaces. For the past few years, there has been a heavy focus on relating the interfacial fluxes to measurable macroscopic properties of the flow so as to provide a fundamental understanding of the mixing process. Significant advances have also been made in the application of computational and experimental techniques to multiphase transport phenomena in materials processing operations. This book presents the application of these modeling tools to dispersed gas–li