E-Book Overview
In one fully comprehensive book, Clothing Appearance and Fit: Science and Technology provides a critical examination of the technological developments and scientific understanding of the appearance and fit of clothing. The authors bridge the gap between the science of beauty and fashion design and garment evaluation technology, garment drape, and human anthropometrics and sizing. The authors begin by discussing body attractiveness, how it relates to clothing material and design parameters, and classical and contemporary theories of beauty. They present the industry's techniques, methods, and standards for assessing clothing appearance and fit and review the research and development of objective measurement technologies for evaluating clothing appearance and fit. The book includes coverage of fabric objective measurement, fabric properties and garment drape, the R & D of body measurement, anthropometrics, and sizing systems. Concluding with a review of published work on garment design and pattern alteration, the book covers myriad industrial standards, techniques, and practices. It is an indespensible resource for textile and fashion students, researchers, and professionals in the clothing and textile industries.
E-Book Content
Clothing appearance and fit: Science and technology
Clothing appearance and fit: Science and technology J. Fan, W. Yu and L. Hunter
Published by Woodhead Publishing Limited in association with The Textile Institute Woodhead Publishing Limited Abington Hall, Abington Cambridge CB1 6AH England www.woodhead-publishing.com Published in North America by CRC Press LLC 2000 Corporate Blvd, NW Boca Raton FL 33431 USA First published 2004, Woodhead Publishing Limited and CRC Press LLC ß 2004, Woodhead Publishing Limited The authors have asserted their moral rights. Every effort has been made to trace and acknowledge ownership of copyright. The publishers will be glad to hear from the copyright holders whom it has not been possible to contact concerning: Figures 1.2, 3.4, 6.1, 6.3, 6.5, 6.6, 7.3, 7.9, 8.26, 8.27, 10.4 and 10.7; Tables 6.3, 6.4, 6.5, 6.7, 6.12, 6.13 and 6.14. This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. Reasonable efforts have been made to publish reliable data and information, but the authors and the publishers cannot assume responsibility for the validity of all materials. Neither the authors nor the publishers, nor anyone else associated with this publication, shall be liable for any loss, damage or liability directly or indirectly caused or alleged to be caused by this book. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming and recording, or by any information storage or retrieval system, without permission in writing from the publishers. The consent of Woodhead Publishing Limited and CRC Press LLC does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from Woodhead Publishing Limited or CRC Press LLC for such copying. Trademark notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation, without intent to infringe. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library. Library of Congress Cataloging-in-Publication Data A catalog record for this book is available from the Library of Congress Woodhead Publishing Limited ISBN 1 85573 745 0 CRC Press ISBN 0-8493-2594-3 CRC Press order number: WP2594 The publisher's policy is to use permanent paper from mills that operate a sustainable forestry policy, and which have been manufactured fro