Book On Brazing Tungsten Carbide And Ceramics For Saws, Tools, And Wear Analysis

E-Book Overview

Carbide Processors, Inc. 10.12.2005. 354 p.
Contents: Process, Components and Techniques; Failure Analysis And Troubleshooting; New Technologies; Safety Considerations in Tungsten Carbide Brazing.

E-Book Content

Book on Brazing Tungsten Carbide & Ceramics - by Tom Walz - Carbide Processors, Inc. Home l Brazing Free Online Book Below - this is about eight years old and has few pictures but is still valuable. Braze Failure Analysis – Especially Failure Analysis in Brazed Tools - NEW This book is a hands-on, practical approach with 97 pages and 165 illustrations, primarily color pictures. The idea is that if you have a braze failure you can find a picture that looks like your braze joints and the accompanying text will tell you what your problem is and how to solve it. Based on twentythree years of work analyzing braze failure in carbide tipped tools, especially saw blades. This information and our analysis have saved hundreds of thousands of dollars for some companies and millions of dollars overall so there is definitely a real value to it. Price: $50 Price: $100 Printed & bound version Building Superior Brazed Tools Selecting and Brazing Tungsten Carbide and Ceramics For Saws, Tools and Wear Parts Including Failure and Breakage Analysis - NEW 267 pages and more than 271 illustrations covering more than seventy topics. This is a companion volume to Braze Failure Analysis. You will see some of the same material in both books. Braze failure is for those that are in trouble and want to get out of it. Building Superior Brazed tools gives much more in-depth material on selecting the right materials and using them. It is for those that wish to build the very best with the current and next generation technologies. http://www.carbideprocessors.com/Brazing/book/index.htm (1 of 4) [10/12/2005 9:12:41 PM] Price: $50 Book on Brazing Tungsten Carbide & Ceramics - by Tom Walz - Carbide Processors, Inc. Price: $140 Printed & bound version Free Online Book Below--this is about eight years old and has few pictures but is still valuable. Brazing Tungsten Carbide & Ceramics For Saws, Tools & Wear Parts With Failure And Breakage Analysis Part 1. Process, Components And Techniques 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Specifying and Buying Tungsten Carbide Tungsten Carbide Specifications and Analysis Tool Tipping Materials Brazing Tungsten Carbide - Short Overview The Brazing Process Surface Treatments Pretinning Examining Pretinning to Prevent Braze Failure Two Kinds of Pretinning Recognizing Quality Saw Plate and Tool Body Cleaning Braze Alloys (Silver Solders) Flux Effectiveness of Various Brazing Gases Temperatures Times Solving a Joint Thickness Problem Fillets Testing Braze Joint Strength Advanced Brazer Training http://www.carbideprocessors.com/Brazing/book/index.htm (2 of 4) [10/12/2005 9:12:41 PM] Book on Brazing Tungsten Carbide & Ceramics - by Tom Walz - Carbide Processors, Inc. Part 2. Failure Analysis And Troubleshooting Explanations & Check Lists 21. Solving Braze Failure Problems 22. Possible Considerations to Use in Failure Analysis 23. Recognizing Breakage From Heat Stress Case Studies Section 1. Analysis 24. Analyzing the Manufacturing Operation to identify Causes of tool Failure 25. How to Analyze Braze Joints on Tools 26. Analyzing Tip Loss on Saws Brazed With Automatic Brazers Section 2. Problem Solving 27. Broken Wear Parts - Ruined $85,000 Castings 28. Cutter failure 29. Router Bit Failure 30. Carbide Failure & Problems With Amateur Pretinning 31. Analysis of Two Failed Saws #1 - Alloy tipped, wire brazing 32. Analysis of Two Failed Saws #2 - Carbide tips, sandwich brazing 33. Tip Loss And Ripped Shoulders Caused by To
You might also like

Kinematic Geometry Of Surface Machining
Authors: Stephen P. Radzevich    130    0



Handbook Of Reliability Engineering
Authors: H. Pham    126    0


Thermodynamics And Kinetics In Materials Science: A Short Course
Authors: Boris S. Bokstein , Mikhail I. Mendelev , David J. Srolovitz    140    0



измерения, контроль, испытания и диагностика т. 3, [кн.] 7
Authors: Под общ. ред. В.В. Клюева    179    0



курсовое проектирование металлорежущих станков
Authors: Подлеснов В.С. , Ананьев А.С.    185    0