Materials Engineering. Science, Processing And Design


E-Book Content

Materials Engineering, Science, Processing and Design Michael Ashby, Hugh Shercliff and David Cebon University of Cambridge, UK AMSTERDAM • BOSTON • HEIDELBERG • LONDON • NEW YORK • OXFORD PARIS • SAN DIEGO • SAN FRANCISCO • SINGAPORE • SYDNEY • TOKYO Butterworth-Heinemann is an imprint of Elsevier Butterworth-Heinemann is an imprint of Elsevier Linacre House, Jordan Hill, Oxford OX2 8DP 30 Corporate Drive, Suite 400, Burlington, MA 01803 First edition 2007 Copyright © 2007, Michael Ashby, Hugh Shercliff and David Cebon. Published by Elsevier Ltd. All rights reserved. The right of Michael Ashby, Hugh Shercliff and David Cebon to be identified as the authors of this work has been asserted in accordance with the Copyright, Designs and Patents Act 1988 No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (44) (0) 1865 843830; fax: (44) (0) 1865 853333; email: [email protected] Alternatively you can submit your request online by visiting the Elsevier web site at http://elsevier.com/locate/ permissions, and selecting Obtaining permission to use Elsevier material Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages s
You might also like

материаловедение
Authors: Мальцев И.М.    279    0


плазменное упрочнение и напыление
Authors: Лащенко Г.И.    239    0




основы материаловедения
Authors: Чумаченко Ю.Т.    147    0


Handbook Of Reliability Engineering
Authors: H. Pham    132    0


Thermodynamics And Kinetics In Materials Science: A Short Course
Authors: Boris S. Bokstein , Mikhail I. Mendelev , David J. Srolovitz    149    0


режимы резания металлов
Authors: Барановский    184    0



наплавка и напыление
Authors: Хасуи А. , Моригаки О.    224    0