Arc Welding Control

E-Book Overview

Text describes the dynamic behavior of arc welding, the power sources used, and their effect on welding technology through the basis of control theory. Describes new ways of controlling the welding arc through modern electronics. For researchers and practitioners.

E-Book Content

Arc welding control Arc welding control Pan Jiluan Cambridge England Published by Woodhead Publishing Limited, Abington Hall, Abington Cambridge CB1 6AH, England www.woodhead-publishing.com Published in North America by CRC Press LLC, 2000 Corporate Blvd, NW Boca Raton FL 33431, USA First published 2003, Woodhead Publishing Limited and CRC Press LLC © 2003, Woodhead Publishing Ltd The author has asserted his moral rights. This book contains information obtained from authentic and highly regarded sources. Reprinted material is quoted with permission, and sources are indicated. Reasonable efforts have been made to publish reliable data and information, but the author and the publishers cannot assume responsibility for the validity of all materials. Neither the author nor the publishers, nor anyone else associated with this publication, shall be liable for any loss, damage or liability directly or indirectly caused or alleged to be caused by this book. Neither this book nor any part may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, microfilming and recording, or by any information storage or retrieval system, without permission in writing from the publishers. The consent of Woodhead Publishing Limited and CRC Press does not extend to copying for general distribution, for promotion, for creating new works, or for resale. Specific permission must be obtained in writing from Woodhead Publishing Limited or CRC Press for such copying. Trademark notice: Product or corporate names may be trademarks or registered trademark
You might also like

Engineered Interfaces In Fiber Reinforced Composites
Authors: Jang-Kyo Kim , Yiu-Wing Mai    229    0


детали машин. атлас конструкций
Authors: Решетов Д.Н. (ред)    179    0



Materials Engineering. Science, Processing And Design
Authors: MichaelAshby    137    0



основы материаловедения
Authors: Чумаченко Ю.Т.    146    0





роторно-поршневые двигатели
Authors: В.С. Бениович , Г.Д. Апазиди , А.М. Бойко    213    0