• Review of manufacture and design issues for palladium membranes • Discussion of the applications of palladium membrane technology, including solar steam reforming, IGCC plants, NGCC plants, CHP plants and hydrogen production • Examples of the technology in operation
Palladium Membrane Technology for Hydrogen Production, Carbon Capture and Other Applications
Related titles Advances in biorefineries (ISBN 978-0-85709-521-3) Advances in hydrogen production, storage and distribution (ISBN 978-0-85709-768-2) Gasification for synthetic fuel production (ISBN 978-0-85709-802-3)
Woodhead Publishing Series in Energy: Number 68
Palladium Membrane Technology for Hydrogen Production, Carbon Capture and Other Applications Edited by
Aggelos Doukelis, Kyriakos Panopoulos, Antonios Koumanakos and Emmanouil Kakaras
Woodhead Publishing is an imprint of Elsevier 80 High Street, Sawston, Cambridge, CB22 3HJ, UK 225 Wyman Street, Waltham, MA 02451, USA Langford Lane, Kidlington, OX5 1GB, UK Copyright © 2015 Elsevier Ltd. All rights reserved Exceptions to the above: Chapter 10: © 2015 A. Giaconia No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher. Permissions may be sought directly from Elsevier’s Science & Technology Rights Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333; email:
[email protected] Alternatively you can submit your request online by visiting the Elsevier website at http://elsevier.com/locate/permissions, and selecting Obtaining permission to use Elsevier material. Notice No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made. British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library. Library of Congress Control Number: 2014944407 ISBN 978-1-78242-234-1 (print) ISBN 978-1-78242-241-9 (online) For information on all Woodhead Publishing publications visit our website at http://store.elsevier.com/ Typeset by Newgen Knowledge Works Pvt Ltd, India Printed and bound in the United Kingdom
List of contributors
K. Atsonios
National Technical University of Athens, Athens, Greece
R. Bredesen
SINTEF Materials and Chemistry, Oslo, Norway
B. Cucchiella
Processi Innovativi S.r.l., Rome, Italy
M.J. den Exter
Energy Research Centre of the Netherlands, LE Petten, The Netherlands
A. Doukelis
National Technical University of Athens, Athens, Greece
F. Gal