Laser Pulse Heating Of Surfaces And Thermal Stress Analysis

E-Book Overview

This book introduces laser pulse heating and thermal stress analysis in materials surface. Analytical temperature treatments and stress developed in the surface region are also explored. The book will help the reader analyze the laser induced stress in the irradiated region and presents solutions for the stress field. Detailed thermal stress analysis in different laser pulse heating situations and different boundary conditions are also presented. Written for surface engineers.


E-Book Content

Materials Forming, Machining and Tribology Series Editor J. Paulo Davim For further volumes: http://www.springer.com/series/11181 Bekir S. Yilbas Ahmad Y. Al-Dweik Nasser Al-Aqeeli Hussain M. Al-Qahtani • • Laser Pulse Heating of Surfaces and Thermal Stress Analysis 123 Bekir S. Yilbas Nasser Al-Aqeeli Hussain M. Al-Qahtani Mechanical Engineering Department King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia ISSN 2195-0911 ISBN 978-3-319-00085-5 DOI 10.1007/978-3-319-00086-2 Ahmad Y. Al-Dweik Department of Mathematics and Statistics King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia ISSN 2195-092X (electronic) ISBN 978-3-319-00086-2 (eBook) Springer Cham Heidelberg New York Dordrecht London Library of Congress Control Number: 2013940306 Ó Springer International Publishing Switzerland 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com) Preface High power lasers can be used as the tools to treat and machine the materials in industry with precision of operation, high processing speed, and low cost. Although laser processing of metallic materials has several advantages over the conventional methods, the development of high temperature gradients in the treated region gives rise to the formation of high stress levels in the region treated. In some instances, this limits the practical applications of the material processed by a high power laser beam. Although considerable research studies were carried out to examine the thermal stress developed d
You might also like

Welding Operations I
   153    0


Welding Operations Ii
Authors: U.S. Army and www.survivalebooks.com    134    0


123 Robotics Experiments For The Evil Genius
Authors: Myke Predko    128    0



способы обработки материалов. уч. пос
Authors: Корягин С.И. , Пименов И.В. , Худяков В.К.    156    0


основы технической диагностики
Authors: Сафарбаков А.М. , Лукьянов А.В. , Пахомов С.В.    141    0


сварка, пайка, склейка и резка металлов и пластмасс. справочник.
Authors: Под ред. Ноймана А. , Рихтера Е.    176    0