E-Book Overview
This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Armor Ceramics Symposium on topics such as Manufacturing; High-Rate Real-Time Characterization; Microstructural Design; Nondestructive Characterization; and Phenomenology and Mechanics of Ceramics Subjected to Ballistic Impact.
E-Book Content
Advances in Ceramic Armor VII Advances in Ceramic Armor VII A Collection of Papers Presented at the 35th International Conference on Advanced Ceramics and Composites January 23-28, 2011 Daytona Beach, Florida Edited by Jeffrey J. Swab Volume Editors Sujanto Widjaja Dileep Singh )WILEY A John Wiley & Sons, Inc., Publication Copyright © 2011 by The American Ceramic Society. All rights reserved. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information on our other products and services or for technical support, please contact our Customer Care Department within the United States at (800) 762-2974, outside the United States at (317) 572-3993 or fax (317) 572-4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic formats. For more information about Wiley products, visit our web site at www.wiley.com. Library of Congress Cataloging-in-Pubtication Data is available. ISBN 978-1-118-05990-6 oBook ISBN: 978-1-118-09525-6 ePDF ISBN: 978-1-118-17309-1 ISSN: 0196-6219 Printed in the United States of America. 10 9 8 7 6 5 4 3 2 1 Contents Preface ix Introduction xi HIGH-RATE REAL-TIME CHARACTERIZATION The Influence of Temperature and Confinement Pressure on the Dynamic Response of Damaged Borosilicate Glass 3 The Strain-Rate Dependence of the Hardness of AIN Doped SiC 11 Static and Dynamic Indentation Response of Ion-Armor™ Glass 21 Xu Nie and Weinong W. Chen N. Ur-rehman, P. Brown, and L. J. Vandeperre Phillip Jannotti and Ghatu Subhash, and Arun Varshneya MANUFACTURING Transp