E-Book Content
Advances in Sintering Science and Technology Ceramic Transactions, Volume 209 A Collection of Papers Presented at the International Conference on Sintering November 16-20, 2009 La Mia, California Edited by Rajendra K. Bordia Eugene A. Olevsky )WILEY A John Wiley & Sons, Inc., Publication This Page Intentionally Left Blank Advances in Sintering Science and Technology This Page Intentionally Left Blank Advances in Sintering Science and Technology Ceramic Transactions, Volume 209 A Collection of Papers Presented at the International Conference on Sintering November 16-20, 2009 La Mia, California Edited by Rajendra K. Bordia Eugene A. Olevsky )WILEY A John Wiley & Sons, Inc., Publication Copyright © 2010 by The American Ceramic Society. All rights reserved. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107orl08ofthel976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information on our other products and services or for technical support, please contact our Customer Care Department within the United States at (800) 762-2974, outside the United States at (317) 572-3993 or fax (317) 572-4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic format. For information about Wiley products, visit our web site at www.wiley.com. Library of Congress Cataloging-in-Publication Data is available. ISBN 978-0-470-40849-0 Printed in the United States of America. 10 9 8 7 6 5 4 3 2 1 Contents Preface Acknowledgements xi xiii APPLICATION OF SINTERING IN EMERGING ENERGY APPLICATIONS: FUEL CELLS, SOLAR CELLS, HYDROGEN STORAGE Sintering Behavior of Ce0 9 Gd 0 -,0-, 95.8 in Reducing Atmosphere 3 Hydrogen Sorption Properties of Ti-Oxide/Chloride Catalyzed Na2LiAIH6 13 High Density Green Pellets of ZrN Fabricated by Particle Processing 21 A. Kaiser, J. W. Phair, S. Foghmoes, S. Ramousse, Z. He Enrique Martinez-Franco, Thomas Klassen, Martin Dornheim, Ruediger Bormann, and David Jaramillo-Vigueras Thomas T. Meek, K. Gwathney, Chaitanya K. Narula, and L.R. Walker EVOLUTION AND CONTROL OF MICROSTRUCTURE DURING SINTERING PROCESSES The Effect of Carbon Source on the Microstructu