E-Book Overview
Full coverage of manufacturing and management in mechanical engineering
Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering.
This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more.
- Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering
- Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks
- Offers the option of being purchased as a four-book set or as single books
- Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats
Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.
E-Book Content
Mechanical Engineers’ Handbook
Mechanical Engineers’ Handbook Fourth Edition
Manufacturing and Management Edited by
Myer Kutz
Cover image: © denisovd / Thinkstock Cover design: Wiley This book is printed on acid-free paper. Copyright © 2015 Published by John Wiley & Sons, Inc., Hoboken, New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750–8400, fax (978) 646–8600, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748–6011, fax (201) 748–6008, or online at www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with the respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor the author shall be liable for damages arising herefrom. For general information ab