Developments In Lubricant Technology

E-Book Overview

Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants • Teaches the reader to understand the role of technology involved in the manufacture of lubricants • Details both major industrial oils and automotive oils for various engines • Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants • Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

E-Book Content

Developments in Lubricant Technology Developments in Lubricant Technology S. P. Srivastava Copyright © 2014 by John Wiley & Sons, Inc. All rights reserved Published by John Wiley & Sons, Inc., Hoboken, New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information on our other products and services or for technical support, please contact our Customer Care Department within the United States at (800) 762-2974, outside the United States at (317) 572-3993 or fax (317) 572-4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic formats. For more information about Wiley products, visit our web site at www.wiley.com. Library of Congress Cataloging-in-Publication Data: Srivastava, S. P. (Som Prakash), 1940– Developments in lubricant technology / S.P. Srivastava.   pages cm   Includes index.   ISBN 978-1-118-16816-5 (cloth) 1.  Lubrication and lubricants.  I.  Title.   TJ1077.S74 2014  621.8′9–dc23 2013051266 Printed in the United States of America 10 9 8 7 6 5 4 3 2 1 Content Preface  Part I  vii Lubricant Basics  1 Chapter 1  INTRODUCTION: LUBRICANT SCENARIO  Chapter 2  CLASSIFICATION OF LUBRICANTS  Chapter 3  MINERAL AND CHEMICALLY MODIFIED LUBRICATING BASE OILS  Chapter 4  SYNTHESIZED BASE OILS  Chapter 5  LUBRICANT ADDITIVES AND THEIR EVALUATION  Chapter 6  LUBRICATION, FRICTION, AND WEAR  Part II  3 7 43 INDUSTRIAL LUBRICANTS  61 87 103 Chapter 7  STEAM AND GAS TURBINE OILS 
You might also like

плазменное упрочнение и напыление
Authors: Лащенко Г.И.    233    0


Kinematic Geometry Of Surface Machining
Authors: Stephen P. Radzevich    135    0


организация производства. уч. пос
Authors: Серебренников Г.Г.    152    0



военно-инженерная подготовка
Authors: Андрющенко В.А. , Пирожков П.А.    154    0


Geometric Mechanics
Authors: Waldyr Muniz Oliva    131    0


неразрушающие методы контроля
Authors: Каневский И.Н. , Сальникова Е.Н.    185    0


детали машин: курс лекций
Authors: Дианов Х.А. , Ефремов Н.Г. , Мицкевич В.Г.    163    0


режимы резания металлов
Authors: Барановский    180    0


курсовое проектирование металлорежущих станков
Authors: Подлеснов В.С. , Ананьев А.С.    190    0