Cellular And Porous Materials: Thermal Properties Simulation And Prediction

E-Book Overview

Providing the reader with a solid understanding of the fundamentals as well as an awareness of recent advances in properties and applications of cellular and porous materials, this handbook and ready reference covers all important analytical and numerical methods for characterizing and predicting thermal properties. In so doing it directly addresses the special characteristics of foam-like and hole-riddled materials, combining theoretical and experimental aspects for characterization purposes.

E-Book Content

Cellular and Porous Materials Edited by ¨ chsner, Graeme E. Murch, Andreas O and Marcelo J.S. de Lemos Further Reading S. Kaskel Porous Materials Introduction to Materials Chemistry, Properties, and Applications 2009 ISBN: 978-3-527-32035-0 M.J. Sailor Porous Silicon in Practice Preparation, Characterization and Applications 2008 ISBN: 978-3-527-31378-5 M. Scheffler, P. Colombo (Eds.) Cellular Ceramics Structure, Manufacturing, Properties and Applications 2005 ISBN: 978-3-527-31320-4 Cellular and Porous Materials Thermal Properties Simulation and Prediction Edited by ¨ chsner, Graeme E. Murch, Andreas O and Marcelo J.S. de Lemos The Editors ¨ chsner Prof. Dr.-Ing. Andreas O Technical University of Malaysia Faculty of Mechanical Engineering 81310 UTM Skudai, Johor Malaysia Prof. Dr. Graeme E. Murch The University of Newcastle School of Engineering University Drive Callaghan, New South Wales 2308 Australia Prof. Dr. Marcelo J. S. de Lemos Instituto Tecnologico de Aeronautica – ITA Departamento de Energia – IEME 12228-900 Sao Jose´ dos Campos, SP Brazil All books published by Wiley-VCH are carefully produced. Nevertheless, authors, editors, and publisher do not warrant the information contained in these books, including this book, to be free of errors. Readers are advised to
You might also like

Carbon Alloys: Novel Concepts To Develop Carbon Science And Technology
Authors: E. Yasuda , M. Ingaki , K. Kaneko , M. Endo , A. Oya , Y. Tanabe    171    0




способы обработки материалов. уч. пос
Authors: Корягин С.И. , Пименов И.В. , Худяков В.К.    159    0


детали машин
Authors: Воробьев Ю.В. , и др.    163    0


Encyclopedia Of Materials, Parts, And Finishes
Authors: Mel Schwartz    117    0


механизмы в современной технике
Authors: Артоболевский    184    0


контрольные задания по металлорежущим станкам
Authors: Тупикин , Григоров , Орлов , Скребнев , Нарожных    161    0



наплавка и напыление
Authors: Хасуи А. , Моригаки О.    220    0