Stability Loss And Buckling Delamination: Three-dimensional Linearized Approach For Elastic And Viscoelastic Composites

E-Book Overview

This book investigates stability loss problems of the viscoelastic composite materials and structural members within the framework of the Three-Dimensional Linearized Theory of Stability (TDLTS). The stability loss problems are considered the development of the initial infinitesimal imperfection in the structure of the material or of the structural members. This development is studied within the framework of the Three-Dimensional Geometrical Non-Linear Theory of the Deformable Solid Body Mechanics. The solution to the corresponding boundary-value problems is presented in the series form in the small parameter which characterizes the degree of the initial imperfection. In this way, the nonlinear problems for the domains bounded by noncanonical surfaces are reduced for the same nonlinear problem for the corresponding domains bounded by canonical surfaces and the series subsequent linearized problems. It is proven that the equations and relations of these linearized problems coincide with the corresponding ones of the well-known TDLTS. Under concrete investigations as stability loss criterion the case is taken for the initial infinitesimal imperfection that starts to increase indefinitely. Moreover, it is proven that the critical parameters can be determined by the use of only the zeroth and first approximations.


E-Book Content

Stability Loss and Buckling Delamination Surkay D. Akbarov Stability Loss and Buckling Delamination Three-Dimensional Linearized Approach for Elastic and Viscoelastic Composites 123 Surkay D. Akbarov Faculty of Mechanics Yildiz Technical University Yildiz Turkey ISBN 978-3-642-30289-3 DOI 10.1007/978-3-642-30290-9 ISBN 978-3-642-30290-9 (eBook) Springer Heidelberg New York Dordrecht London Library of Congress Control Number: 2012944897 Ó Springer-Verlag Berlin Heidelberg 2013 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com) To my father Djabbar Akbarov and my mother Teller Akbarova for their help with my education Preface This book is the first to f
You might also like

Mechanics Of Sheet Metal Forming
Authors: Jack Hu , Zdzislaw Marciniak , John Duncan    193    0


Welding Operations I
   159    0




Ion Implantation And Synthesis Of Materials
Authors: Michael Nastasi , James W. Mayer    90    0


Semi-markov Risk Models For Finance, Insurance And Reliability
Authors: Jacques Janssen , Raimondo Manca    125    0




слесарные работы
Authors: Н. Б. Козьмин    221    0


Mechanical Behavior Of Materials
Authors: Marc André Meyers , Krishan Kumar Chawla    143    0