E-Book Overview
For more than 30 years the book Practical Gear Design, later re-titled Handbook of Practical Gear Design, has been the leading engineering guide and reference on the subject. It is now available again in its most recent edition. The book is a detailed, practical guide and reference to gear technology. The design of all types of gears is covered, from those for small mechanisms to large industrial applications. The presentation is designed for easy reference for those involved in practical gear design, manufacture, applications and problem solving. The text is well illustrated with clear diagrams and photographs. The many tables provide needed reference data in convenient form.
E-Book Content
“Frontmatter” Mechanical Engineering Handbook Ed. Frank Kreith Boca Raton: CRC Press LLC, 1999 1999 by CRC Press LLC c Contents ______________________________ SECTION 1 Mechanics of Solids Bela I. Sandor 1.1 Introduction Bela I Sandor 1.2 Statics Bela I. Sandor 1.3 Dynamics Stephen M. Birn and Bela I. Sandor 1.4 Vibrations Bela I. Sandor 1.5 Mechanics of Materials Bela I. Sandor 1.6 Structural Integrity and Durability Bela I. Sandor 1.7 Comprehensive Example of Using Mechanics of Solids Methods Richard C. Duveneck, David A. Jahnke, Christopher J. Watson, and Bela I. Sandor SECTION 2 Engineering Thermodynamics Michael J. Moran 2.1 Fundamentals Michael J.Moran 2.2 Control Volume Applications Michael J.Moran 2.3 Property Relations and Data Michael J.Moran 2.4 Combustion Michael J.Moran 2.5 Exergy Analysis Michael J.Moran 2.6 Vapor and Gas Power Cycles Michael J.Moran 2.7 Guidelines for Improving Thermodynamic Effectiveness Michael J.Moran SECTION 3 Fluid Mechanics Frank Kreith 3.1 Fluid Statics Stanley A.Berger 3.2 Equations of Motion and Potential Flow Stanley A.Berger 3.3 Similitude: Dimensional Analysis and Data Correlation Suar W.C