E-Book Overview
American Welding Society (AWS). 19p. This document includes the following concise and helpful fact sheets from the American Welding Society’s Committee on Safety and Health: - Fact Sheet 4: Chromium and Nickel in Welding Fume, October 2003; - Fact Sheet 19: Laser Welding and Cutting Safety, March 1998; - Fact Sheet 20: Thermal Spraying Safety, February 1997; - Fact Sheet 27: Thoriated Tungsten Electrodes, October 2003; - Fact Sheet 36: Ventilation for Welding & Cutting, September 2009.
E-Book Content
AWS SAFETY AND HEALTH FACT SHEET BUNDLE FOR AEROSPACE WELDING Includes the following concise and helpful fact sheets from the American Welding Society’s Committee on Safety and Health Fact Sheet 4: Chromium and Nickel in Welding Fume Fact Sheet 19: Laser Welding and Cutting Safety Fact Sheet 20: Thermal Spraying Safety Fact Sheet 27: Thoriated Tungsten Electrodes Fact Sheet 36: Ventilation for Welding & Cutting The following safety fact sheets and the complete 66-page ANSI Z49.1 Safety in Welding, Cutting, and Allied Processes are available for free download at www.aws.org/safety: 1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 16: 17: 18: 19: 20: 21: Fumes and Gases Radiation Noise Chromium and Nickel in Welding Fume Electrical Hazards Fire and Explosion Prevention Burn Protection Mechanical Hazards Tripping and Falling Falling Objects Confined Spaces Contact Lens Wear Ergonomics in the Welding Environment Graphic Symbols for Precautionary Labels Style Guidelines for Safety and Health Documents Pacemakers and Welding Electric and Magnetic Fields (EMF) Lockout/Tagout Laser Welding and Cutting Safety Thermal Spraying Safety Resistance Spot Welding 22: Cadmium Exposure from Welding & Allied Processes 23: California Proposition 65 24: Fluxes for Arc Welding and Brazing: Safe Handling and Use 25: Metal Fume Fever 26: Arc Viewing Distance 27: Thoriated Tungsten Electrodes 28: Oxyfuel Safety: Check Valves and Flashback Arrestors 29: Grounding of Portable and Vehicle Mounted Welding Generators 30: Cylinders: Safe Storage, Handling, and Use 31: Eye and Face Protection for Welding and Cutting Operations 33: Personal Protective Equipment (PPE) for Welding & Cutting 34: Coated Steels: Welding and Cutting Safety Concerns 36: Ventilation for Welding & Cutting 37: Selecting Gloves for Welding & Cutting Z49.1: Safety in Welding, Cutting, and Allied Processes www.aws.org/safety Safety and Health Fact Sheet No. 4 October 2003 © 2003 American Welding Society Chromium and Nickel in Welding Fume INTRODUCTION The fume from welding processes may contain compounds of chromium, including hexavalent chromium, and of nickel. The composition of the base metals, the welding materials used, and the welding processes affect the specific compounds and concentrations found in the welding fume. • NIOSH Criteria Documents 76–129 and 77–164 (listed below) contain these conclusions based on data from the chromate producing industry and from nickel ore-refining processes. • Conclusions from the International Agency for Research on Cancer (IARC): (1) there is limited evidence in humans for the carcinogenicity of welding fumes and gases, and (2) there is inadequate evidence in experimental animals for the carcinogenicity of welding fumes. IMMEDIATE EFFECTS OF OVEREXPOSURE TO FUMES CONTAINING CHROMIUM AND NICKEL • Similar to the effects produced by fumes from other metals. • Cause symptoms such as nausea, headaches, dizziness, and respiratory irritation. • Some persons may develop a sensitivity to chromium or nickel which can result in dermatitis or skin rash. CHRONIC (LONG TERM) EFFECTS OF EXPOSURE TO FUMES CONTAINING CHROMIUM AND NICKEL • Definite effects