Wind Tunnels: Uses And Developments

E-Book Overview

Wind tunnels are facilities in which the wind is produced by fans or by compressed air to study and measure the action of the air flow around a solid. There are two basic types of wind tunnels: the closed-circuit and the open-circuit. Open-circuits draw air from the ambient environment and exhaust it back to the ambient after exiting the fan, while in closed-circuit, the air repeatedly circulates through the tunnel. The closed-circuit design delivers improved efficiency and generates less noise, but it is more expensive and more difficult to manufacture. Wind tunnels are typically used in aerodynamic research to analyze the behavior of flows under varying conditions, both within channels and over solid surfaces. The present book focus on uses and developments of wind tunnels. It consists on nine chapters presenting different studies on the design, uses and developments of the wind tunnel in different applications like wind turbines, building and aircraft models. The presented case studies and development approaches aim to provide the readers, such as engineers and PhD students, with basic and applied studies broadly related to the wind tunnels and its applications.

E-Book Content

MECHANICAL ENGINEERING THEORY AND APPLICATIONS WIND TUNNELS USES AND DEVELOPMENTS No part of this digital document may be reproduced, stored in a retrieval system or transmitted in any form or by any means. The publisher has taken reasonable care in the preparation of this digital document, but makes no expressed or implied warranty of any kind and assumes no responsibility for any errors or omissions. No liability is assumed for incidental or consequential damages in connection with or arising out of information contained herein. This digital document is sold with the clear understanding that the publisher is not engaged in rendering legal, medical or any other professional services. MECHANICAL ENGINEERING THEORY AND APPLICATIONS Additional books and e-books in this series can be found on Nova’s website under the Series tab. MECHANICAL ENGINEERING THEORY AND APPLICATIONS WIND TUNNELS USES AND DEVELOPMENTS ZIED DRISS EDITOR Copyright © 2019 by Nova Science Publishers, Inc. All rights reserved. No part of this book may be reproduced, stored in a retrieval system or transmitted in any form or by any means: electronic, electrostatic, magnetic, tape, mechanical photocopying, recording or otherwise without the written permission of the Publisher. We have partnered with Copyright Clearance Center to make it easy for you to obtain permissions to reuse content from this publication. Simply navigate to this publication’s page on Nova’s website and locate the “Get Permission” button below the title description. This button is linked directly to the title’s permission page on copyright.com. Alternatively, you can visit copyright.com and search by title, ISBN, or ISSN. For further questions about using the service on copyright.com, please contact: Copyright Clearance Center Phone: +1-(978) 750-8400 Fax: +1-(978) 750-4470 E-mail: [email protected] NOTICE TO THE READER The Publisher has taken reasonable care in the preparation of this book, but makes no expressed or implied warranty of any kind and assumes no responsibility for any errors or omissions. No liability is assumed for incidental or consequential damages in connection with or arising out of information contained in this book. The Publisher shall not be liable for any special, consequential, or exemplary damages resulting, in whole or in part, from the readers’ use of, or reliance upon, this material. Any parts of this book based on government reports are so indicated and copyright is claimed for those parts to t
You might also like

Mechanical Engineer's Data Handbook
Authors: James Carvill    211    0


работа на токарных станках с чпу
Authors: Андреев Г.И.    172    0


детали машин. атлас конструкций
Authors: Решетов Д.Н. (ред)    172    0



Concise Encyclopedia Of The Structure Of Materials
Authors: J. W. Martin Emeritus Reader in Physical Metallurgy    126    0





основы технической диагностики
Authors: Сафарбаков А.М. , Лукьянов А.В. , Пахомов С.В.    145    0