High-power Ion Beam Sources For Semiconductor's Technologies

E-Book Overview

Institute of Electrical and Electronics Engineers (IEEE). KORUS Physics. 2001 0-7803-7008-2/01 p.366-370 In this report two sources of high-power ion beams of nanosecond duration are described, a MUK and a TEMP units. They generate ion beams with ion energies of up to 500 keV; puse duration is 20-200 and 50 ns respectively. There are two operations modes to which MUK and TEMP are designated respectively. The first one is heavy ion implantation, beam parametrs are as follows: beam composition can be varied from a range of H+, Cn+, Aln+, Mgn+, Fen+, Wn+, etc.; current density from1 to 20 A/cm2 per pulse; total energy flux up to 20 J. And the second one which is used mainly for energetic influence application has the following parametrs: beam composition is mixed H+ and Cn+ ions; current density 40-200 A/cm2 per pulse; total energy flux 0,3-0,5 kJ. The sources can be provided with various diode systems. They can be applied in material research and semiconductor's technology.

E-Book Information

  • Pages In File: 5

  • Language: English

  • Topic: 220

  • Library: twirpx

  • Commentary: 1,267,982

  • Org File Size: 495,890

  • Extension: pdf

  • Tags: Машиностроение и материалообработка Высокоэнергетические методы обработки

You might also like

Carbon Alloys: Novel Concepts To Develop Carbon Science And Technology
Authors: E. Yasuda , M. Ingaki , K. Kaneko , M. Endo , A. Oya , Y. Tanabe    171    0





военно-инженерная подготовка
Authors: Андрющенко В.А. , Пирожков П.А.    154    0





механизмы в современной технике
Authors: Артоболевский    184    0