E-Book Overview
Applied Metrology for Manufacturing Engineering, stands out from traditional works due to its educational aspect. Illustrated by tutorials and laboratory models, it is accessible to users of non-specialists in the fields of design and manufacturing. Chapters can be viewed independently of each other. This book focuses on technical geometric and dimensional tolerances as well as mechanical testing and quality control. It also provides references and solved examples to help professionals and teachers to adapt their models to specific cases. It reflects recent developments in ISO and GPS standards and focuses on training that goes hand in hand with the progress of practical work and workshops dealing with measurement and dimensioning.Content: Chapter 1 Fundamentals of Error Analysis and their Uncertainties in Dimensional Metrology Applied to Science and Technology (pages 1–84): Chapter 2 Fundamentals of Dimensional and Geometrical Tolerances According to ISO, CSA (Canada), and ANSI (USA) (pages 85–162): Chapter 3 Measurement and Controls Using Linear and Angular Standards (pages 163–235): Chapter 4 Surface Control (pages 237–308): Chapter 5 Opto?Mechanical Metrology (pages 309–340): Chapter 6 Control of Surface States (pages 341–393): Chapter 7 Computer?Aided Metrology?CAM (pages 395–452): Chapter 8 Control of Assembly and Transmission Elements (pages 453–530): Chapter 9 Control of Materials Hardness Testing (pages 531–588): Chapter 10 Overall Summary (pages 589–594): Chapter 1 Appendix (pages 615–629): Chapter 2 Appendix (pages 631–636): Chapter 3 Appendix (pages 637–639): Chapter 4 Appendix (pages 641–643): Chapter 5 Appendix (pages 645–663): Chapter 6 Appendix (pages 665–671):
E-Book Content
Applied Metrology for Manufacturing Engineering
Applied Metrology for Manufacturing Engineering
Ammar Grous
First published 2011 in Great Britain and the United States by ISTE Ltd and John Wiley & Sons, Inc. Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms and licenses issued by the CLA. Enquiries concerning reproduction outside these terms should be sent to the publishers at the undermentioned address: ISTE Ltd 27-37 St George’s Road London SW19 4EU UK
John Wiley & Sons, Inc. 111 River Street Hoboken, NJ 07030 USA
www.iste.co.uk
www.wiley.com
© ISTE Ltd 2011 The rights of Ammar Grous to be identified as the author of this work have been asserted by him in accordance with the Copyright, Designs and Patents Act 1988. ____________________________________________________________________________________ Library of Congress Cataloging-in-Publication Data Grous, Ammar. Applied metrology for manufacturing engineering / Ammar Grous. p. cm. Includes bibliographical references and index. ISBN 978-1-84821-188-9 1. Manufacturing processes. 2. Metrology. 3. Tolerance (Engineering) I. Title. TS183.G796 2011 670.42--dc22 2010046518 British Library Cataloguing-in-Publication Data A CIP record for this book is available from the British Library ISBN 978-1-84821-188-9 Printed and bound in Great Britain by CPI Antony Rowe, Chippenham and Eastbourne
Table of Contents
Chapter 1. Fundamentals of Error Analysis and their Uncertainties in Dimensional Metrology Applied to Science and Technology . . . . . . . . 1.1. Introduction to uncertainties in dimensional metrology . . . . . . 1.2. Definition of standards . . . . . . . . . . . . . . . . . . . . . . . . . 1.3. Definition of errors and uncertai